If you’ve been using your Vapsolo device for a while, you’ve probably noticed a small build-up that doesn’t just impact flavor—it can even change the way your device works. As a Vapsolo supplier, I get questions about cleaning all the time, and it’s one of the most important things to keep your device performing like new, no matter what model you have. A lot of vapers either overcomplicate cleaning or wait too long, but with the right steps, it’s quick, easy, and only takes 10 to 15 minutes. Let’s break this down step by step, and cover what works (and what doesn’t) to keep your Vapsolo device in top shape. Vapsolo
First, let’s talk about why cleaning matters so much. When you use e-liquid, small particles of nicotine, flavorings, and propylene glycol (PG) and vegetable glycerin (VG) can settle in every part of your device. Over time, this build-up isn’t just gross—it can block airflow, muffle the flavor of your e-liquid, and even reduce the battery life of your Vapsolo. I’ve seen customers send back devices that were underperforming because they never cleaned them; the coil was clogged, the air holes were blocked, and the mouthpiece had a sticky film that made every hit taste stale. Regular cleaning every 1 to 2 weeks (or more often if you use high-VG e-liquid, which is thicker and builds up faster) prevents all that, and it’s way cheaper than replacing coils or a whole device prematurely.
Before you start, you need to make sure you have the right tools. You don’t need fancy equipment—most things you probably already have at home. Here’s what I recommend: warm (not boiling) water, a gentle dish soap that’s free of harsh chemicals (something like Dawn Original or another mild formula works—avoid antibacterial soaps or ones with added moisturizers, since those can leave residue), a small soft-bristled brush (an old toothbrush works perfectly, just make sure it’s new and hasn’t been used for other household cleaning), cotton swabs (Q-tips), paper towels, and isopropyl alcohol (at least 70% strength, not 91% or higher—high percentage alcohol can be too harsh on plastic parts and cause them to crack). One important rule: always make sure your device is fully disassembled and turned off (and remove the battery, if it’s a mod-style device) before cleaning. Never get any part of the electronic base of your device wet—water and electricity don’t mix, and that can damage your Vapsolo beyond repair.
Let’s start with the basics: the parts that come into direct contact with e-liquid and vapor. For most Vapsolo devices, this includes the mouthpiece, the tank, the coil, and the airflow control ring. First, separate all the parts. Unscrew the mouthpiece from the tank, unscrew the tank from the battery base, and remove the coil from the tank. If there’s any leftover e-liquid in the tank, pour it out and dispose of it properly—don’t pour it down the drain or on the ground.
Next, the tank and mouthpiece. These are the parts with the most build-up. Rinse them under warm running water, but don’t use hot water—extreme heat can warp plastic tanks, especially clear acrylic ones that some Vapsolo models use. For the sticky residue that won’t come off with just water, add a drop of your gentle dish soap to a bowl of warm water, and let the tank and mouthpiece soak in this solution for 5 to 10 minutes. This softens the build-up so it comes off easier. After soaking, take your old toothbrush and gently scrub the inside and outside of the tank, paying extra attention to the small airflow holes on the side or bottom—those are tiny and easy to miss, and a single piece of build-up there can completely block airflow. For the mouthpiece, scrub the inside carefully, since that’s where you put your mouth, and you don’t want any leftover soap residue. Once you’re done scrubbing, rinse both the tank and mouthpiece thoroughly under warm water, making sure all soap is gone. Then pat them dry with a paper towel, and let them air dry completely for at least 30 minutes—don’t put them back together while they’re still wet, because that can cause mold or mildew, which is not safe and will ruin your next sessions.
Now, the coil. This is the part that does the heating, and it’s the trickiest part to clean. I always tell customers that even if you clean your coil regularly, it’s not meant to be cleaned forever—eventually the cotton will burn out, and you’ll need to replace it. But if your coil is just a little clogged, you can clean it to extend its life by a few uses. Here’s how: take the coil and hold it under warm running water, gently rubbing the metal mesh of the heating element with your finger to loosen any built-up gunk. Be careful not to twist or pull the cotton inside the coil, because that can damage it. If there’s still residue, you can hold the coil over a sink and use a cotton swab dipped in a little isopropyl alcohol to gently rub the metal parts, then rinse it thoroughly with warm water. Once it’s rinsed, lay it on a paper towel and let it air dry for at least an hour. Important note: never dry the coil with a paper towel, because tiny fibers can get stuck in the mesh and end up in your vapor, and never attempt to burn the coil to clean it—this can damage the heating element and create harmful fumes. If your coil has been used for more than a week, or if you’ve been using high-nicotine or high-VG e-liquid, cleaning it might not work, and replacing it is cheaper and safer. That’s why as a Vapsolo supplier, I recommend keeping a few replacement coils on hand—you never know when you’ll need one.
Next, the airflow control ring and the battery base. These parts don’t come into direct contact with e-liquid, but they can still get sticky from vapor residue, especially the airflow ring. To clean these: take a cotton swab dipped in a little isopropyl alcohol and gently rub all around the airflow ring, making sure to get into the small slots where the air flows. For the battery base (the part that connects to the tank), never get any water or alcohol on the metal terminals or the contact points—this can damage the electronics. Instead, take a dry cotton swab and gently wipe the terminals to remove any dust or sticky residue. If there’s build-up that’s hard to remove, you can barely dampen a cotton swab with alcohol, wring it out as much as possible, and then gently wipe the terminals, making sure not to let any liquid get into the gaps around the terminals. Then immediately wipe the terminals with a dry cotton swab to make sure they’re completely dry.
Once all parts are cleaned, it’s time to put them back together. Wait until every part is 100% dry—no exceptions. I can’t stress this enough; even a little moisture in the tank can cause spitting when you take a hit, or damage the battery. Once everything is dry, screw the coil back into the tank, fill the tank with your favorite e-liquid, let it sit for 5 minutes to let the cotton in the coil soak up the e-liquid, then screw the tank back onto the battery base and attach the mouthpiece.
Now, let’s talk about what you should never do when cleaning your Vapsolo device, because these are mistakes I see all the time that end up damaging the device. First, don’t use boiling water or high-temperature liquid—this warps plastic parts and can cause the tank to crack. Second, don’t use harsh chemicals like bleach, window cleaner, or antibacterial soap—these leave toxic residue that will get into your vapor, which is dangerous to inhale. Third, don’t over-clean the electronic parts—alcohol and water are bad news for the battery and circuit board, so stick to dry cotton swabs for those. Fourth, don’t reuse coils too many times—every coil has a lifespan, and cleaning it more than twice will only lead to burnt hits and bad flavor, so replace it when it starts to taste off. Fifth, don’t skip the air drying step—putting parts back together while wet is a surefire way to get mold, and that will ruin your device and pose a health risk.
If you follow these steps, your Vapsolo device will last longer, taste better, and work more reliably. But if you have any questions about your specific Vapsolo model, or if you need replacement parts, coils, or devices, don’t hesitate to reach out. As a Vapsolo supplier, we’re here to help you get the most out of your device, whether you’re a long-time vaper or just getting started. We offer a full range of Vapsolo products, from basic starter kits to advanced mods, and we can help you pick the right setup for your needs. If you’re looking to stock up on supplies, or if you have any questions about cleaning, maintenance, or using your Vapsolo device, we encourage you to connect with our team to discuss your requirements.
MASKKING References
- Electronic Cigarette Association. (2022). Best Practices for Vaping Device Maintenance and Cleaning. Retrieved from industry guidelines for vaping device care.
- World Health Organization. (2021). Harm Reduction Guidelines for Vaping Products: Cleaning and Safety. Retrieved from public health resources on e-cigarette maintenance.
- Vaping Industry Association. (2023. Standard Care Procedures for Reusable Vaping Devices. Retrieved from industry best practice documents.
Hongkong Voles Technology Co., Ltd.
As one of the most professional vapsolo enterprises in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to wholesale bulk high quality vapsolo in stock here from our factory. Contact us for more details.
Address: Room 302, Tower A, Liangao Business Building, Bao’an District, Shenzhen City
E-mail: sales02@volestech.com
WebSite: https://www.joylifevape.com/
